



Previous
Next
- High duty sugar cube relay with 26A 277VAC, 32A 277VAC.
- Contact gap can be greater than 1.5 & 2.1 mm.
- Conforms to European photovoltaic standard IEC 62109-1.
- Coil holding voltage can be reduced to 36%, 55%V of the nominal coil voltage for saving energy.
- High performance PCB power relay for photovoltaic power generation systems (solar inverter), motor control, compressor control, home appliances.
- Complies with RoHS-Directive 2011/65/EU.
Ordering Information
110 |
□ |
□ |
□ |
– |
1A |
H |
□ |
– |
□ |
– | C |
□ |
|||
1 |
2 |
3 |
4 |
5 |
6 | 7 | 8 | 9 | 10 |
1. | 110 | — | Basic series designation |
2. | Blank | — | Standard type |
B | — | With insulation barrier | |
3. | Blank | — | Standard type |
E | — | Extremely high capacity type (Only for 2.1mm contact gap) | |
H | — | High power type | |
4. | Blank | — | Standard type |
A | — | Double pin type (not available with 110E version) | |
5. | 1A | — | Single pole normally open |
6. | H | — | Contact material Ag alloy |
7. | Blank | — | Contact gap ≧1.5mm |
1 | — | Contact gap ≧2.1mm | |
8. | Blank | — | Standard type |
F | — | Class F | |
9. | C | — | Flux tight |
V | — | Sealed type | |
S | — | Sealed type washable | |
10. | □ | — | Coil voltage (please refer to the coil rating data for the availability) |
Description
Outline (L×W×H) mm | 21.5 × 16 × 20.6 | |
Contact configuration | 1A | |
Max. Allowable Contact current(A) | 26A (110)32A (110E) | |
Contact rating | Resistive load | 26A 240VAC、22A 240VAC (110),32A 240VAC (110E) |
Coil voltage | DC | 12~48V |
AC | —— | |
Power consumption | DC | 1.67W (Holding:0.5W),2.8W (Holding:0.29W) |
AC | —— | |
Life expectancy | Mechanical(Min.) | 5×105 (110)1×105 (110E) |
Electrical(Min.) | 3×104 (110)1×104 (110E) | |
Dielectric strength | Open contact | 1500VAC |
Contact and coil | 2500VAC、4000VAC (B) | |
Contact circuits | —— |
PC Board Layout